(Logical change 1.268)

git-svn-id: https://svn.mcs.anl.gov/repos/bcfg/trunk/bcfg2@1090 ce84e21b-d406-0410-9b95-82705330c041

1 files changed, 160 insertions, 0 deletions

diff --git a/gentoo/bcfg2-0.6.9.2.ebuild b/gentoo/bcfg2-0.6.9.2.ebuild
index e69de29bb..691358a96 100644
--- a/gentoo/bcfg2-0.6.9.2.ebuild
+++ b/gentoo/bcfg2-0.6.9.2.ebuild
@@ -0,0 +1,160 @@
+# Copyright 1999-2004 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+
+# NOTE: The comments in this file are for instruction and documentation.
+# They're not meant to appear with your final, production ebuild.  Please
+# remember to remove them before submitting or committing your ebuild.  That
+# doesn't mean you can't add your own comments though.
+
+# The 'Header' on the third line should just be left alone.  When your ebuild
+# will be committed to cvs, the details on that line will be automatically
+# generated to contain the correct data.
+
+# Short one-line description of this package.
+DESCRIPTION="Bcfg2 is a prototype configuration management tool"
+
+# Homepage, not used by Portage directly but handy for developer reference
+HOMEPAGE="http://www.mcs.anl.gov/cobalt/bcfg2"
+
+# Point to any required sources; these will be automatically downloaded by
+# Portage.
+SRC_URI="ftp://ftp.mcs.anl.gov/pub/bcfg/${P}.tar.gz"
+
+# License of the package. This must match the name of file(s) in
+# /usr/portage/licenses/. For complex license combination see the developer
+# docs on gentoo.org for details.
+LICENSE="BSD"
+
+# The SLOT variable is used to tell Portage if it's OK to keep multiple
+# versions of the same package installed at the same time. For example,
+# if we have a libfoo-1.2.2 and libfoo-1.3.2 (which is not compatible
+# with 1.2.2), it would be optimal to instruct Portage to not remove
+# libfoo-1.2.2 if we decide to upgrade to libfoo-1.3.2. To do this,
+# we specify SLOT="1.2" in libfoo-1.2.2 and SLOT="1.3" in libfoo-1.3.2.
+# emerge clean understands SLOTs, and will keep the most recent version
+# of each SLOT and remove everything else.
+# Note that normal applications should use SLOT="0" if possible, since
+# there should only be exactly one version installed at a time.
+# DO NOT USE SLOT=""! This tells Portage to disable SLOTs for this package.
+SLOT="0"
+
+# Using KEYWORDS, we can record masking information *inside* an ebuild
+# instead of relying on an external package.mask file. Right now, you
+# should set the KEYWORDS variable for every ebuild so that it contains
+# the names of all the architectures with which the ebuild works. We have
+# 4 official architecture names right now: "~x86", "~ppc", "~sparc"
+# and "~alpha".  The ~ in front of the architecture indicates that the
+# package is new and should be considered unstable until testing proves its
+# stability.  Once packages go stable the ~ prefix is removed.
+# So, if you've confirmed that your ebuild works on x86 and ppc,
+# you'd specify: KEYWORDS="~x86 ~ppc"
+# For packages that are platform-independent (like Java, PHP or Perl
+# applications) specify all keywords.
+# For binary packages, use -* and then list the archs the bin package
+# exists for.  If the package was for an x86 binary package, then
+# KEYWORDS would be set like this: KEYWORDS="-* x86"
+# DO NOT USE KEYWORDS="*". This is deprecated and only for backward
+# compatibility reasons.
+KEYWORDS="~x86"
+
+# Comprehensive list of any and all USE flags leveraged in the ebuild,
+# with the exception of any ARCH specific flags, i.e. "ppc", "sparc",
+# "x86" and "alpha". This is a required variable. If the
+# ebuild doesn't use any USE flags, set to "".
+IUSE=""
+
+# Build-time dependencies, such as
+#    ssl? ( >=dev-libs/openssl-0.9.6b )
+#    >=dev-lang/perl-5.6.1-r1
+# It is advisable to use the >= syntax show above, to reflect what you
+# had installed on your system when you tested the package.  Then
+# other users hopefully won't be caught without the right version of
+# a dependency.
+DEPEND=">=sss-0.99_pre6
+    elementtree
+	fam"
+
+# Run-time dependencies, same as DEPEND if RDEPEND isn't defined:
+#RDEPEND=""
+
+# Source directory; the dir where the sources can be found (automatically
+# unpacked) inside ${WORKDIR}.  S will get a default setting of ${WORKDIR}/${P}
+# if you omit this line.
+S=${WORKDIR}/${P}
+
+src_compile() {
+	# Most open-source packages use GNU autoconf for configuration.
+	# You should use something similar to the following lines to
+	# configure your package before compilation.  The "|| die" portion
+	# at the end will stop the build process if the command fails.
+	# You should use this at the end of critical commands in the build
+	# process.  (Hint: Most commands are critical, that is, the build
+	# process should abort if they aren't successful.)
+	python setup.py build
+	# Note the use of --infodir and --mandir, above. This is to make
+	# this package FHS 2.2-compliant.  For more information, see
+	#   http://www.pathname.com/fhs/
+
+	# Also note that it is cleaner and easier to use econf, which is the
+	# portage shortcut to the above ./configure statement:
+	#
+	# econf || die
+	# Note that econf will die on failure, but plase use econf || die
+	# for consistency.
+
+	# emake (previously known as pmake) is a script that calls the
+	# standard GNU make with parallel building options for speedier
+	# builds (especially on SMP systems).  Try emake first.  It might
+	# not work for some packages, in which case you'll have to resort
+	# to normal "make".
+	#make || die
+}
+
+src_install() {
+	# You must *personally verify* that this trick doesn't install
+	# anything outside of DESTDIR; do this by reading and
+	# understanding the install part of the Makefiles.
+	#make DESTDIR=${D} install || die
+	install -d ${D}/usr/sbin
+	install -d ${D}/etc/init.d
+	exeinto /etc/init.d
+	exeopts -m0755
+	doexe ${FILESDIR}/bcfg2-server ${FILESDIR}/bcfg2-client
+	# dosbin bcfgd.py bcfgctl.py bcfg.py bcfg-refresh.py
+	# doman bcfg.1 bcfgctl.1 bcfgd.8 bcfgd.conf.5
+	# dodoc README LICENSE docs/*
+	# docinto examples
+	# dodoc test/*							
+	python setup.py install --root=${D} --record=PY_SERVER_LIBS
+	
+	# For Makefiles that don't make proper use of DESTDIR, setting
+	# prefix is often an alternative.  However if you do this, then
+	# you also need to specify mandir and infodir, since they were
+	# passed to ./configure as absolute paths (overriding the prefix
+	# setting).
+	#make \
+	#	prefix=${D}/usr \
+	#	mandir=${D}/usr/share/man \
+	#	infodir=${D}/usr/share/info \
+	#	install || die
+	# Again, verify the Makefiles!  We don't want anything falling
+	# outside of ${D}.Q
+	# `												
+
+	# The portage shortcut to the above command is simply:
+	#
+	#einstall || die
+	# Note that einstall will die on failure, but please use einstall || die
+	# for consistency.
+}
+
+pkg_postinst () {
+	depscan.sh
+}
+
+pkg_postrm () {
+	[ -f /etc/init.d/bcfg2-client ] && rm -f /etc/init.d/bcfg2-client
+	[ -f /etc/init.d/bcfg2-server ] && rm -f /etc/init.d/bcfg2-server
+	depscan.sh
+}